Gränsläges brytar / limit switch

Gränsläges brytare vid in- och utvinschning

Pris med moms:
3.836,25 kr
Pris utan moms:
3.069,00 kr

I lager


Enlig regler för  CE standarder  bör vinschar med kapacitet på mera än 1000 kg utrustas med gränsläges brytare:

Principles CE requirements:

  1. Any motion which has a designed restriction of movement shall be provided with motion limiters. The inner and outer limit of a lifting winch are normally limited with a spindle limit switch with 2 contacts.  
  2. Moving or turning transmissions and parts shall be designed, positioned or guarded in order  to protect against the risks associated with possible contact of exposed persons during the intended use. (when located in an easily accessible position)    
  3. Winches for lifting, lowering and pulling purposes with a rated capacity of 1.000kg or more shall be fitted with a rated capacity limiter.  

Laubjerg Vinsch erbjuder roterande gränsläges brytare på vinschar som produceras hos Marotek.
Alla offerter på vinschar med kapacitet från 1000kg innehåller en offert på gränsläges brytare vid in- och utvinschning som tillval. 

PF2C Rotary Limit Switch fungerar på detta sätt:

The rotary limit switch is used to control the movement of industrial machinery. It operates as an
auxiliary controller of electrical motors through a power interface, such as a contactor or PLC. Suitable for
heavy duty, its shaft is connected to the motor and, after a set number of revolutions, the cams operate the
switches, thus starting the predetermined movement. A worm gear and a helical toothed gear combined with
one or more pairs of straight toothed gears are used for the transmission of the movement from the input
shaft to the output shaft.

Ved at bruge hjemmesiden accepterer du brugen af cookies mere information

Cookie indstillingerne på denne hjemmeside er aktiveret for at give dig den bedste oplevelse. Hvis du fortsætter med at bruge hjemmesiden uden at ændre dine cookie indstillinger eller du klikker Accepter herunder, betragtes dette som din accept