LVYAK7000
Mindre hydraulisk lyft- och dragvinsch (EN14492-1 rating/ drag 3175 kg/ lyft 1600kg). 35 x 10mm wire
Pris med moms:
32.688,75 kr
Pris utan moms:
26.151,00 kr
I lager
Beskrivning
LVYAK hydraulisk vinsch 7000/3500 från ComeUp LVYAK 7 Worm Gear Hydraulic Recovery Winch EN 14492
3175 kg 78 m/pm 110 Bar 60 l/min. Long Drum 35 mtr 10 mm
LVYAK hydraulisk vinsch 7000/3500, är en mindre hydraulisk drag- och lyftvinsch producerad av ComeUp:
7000lbs (EN 14492: drag 3175kg/lyft 1600kg). Populär produkt bland de mindre hydrauliska vinscharna.
LVYAK 7 LONG DRUMmm wire
- 7,000 lb hydraulic worm gear winch
- Powered by an onboard hydraulic pump or PTO
- Fast and variable recovery speeds for high working rate
- High efficient and constant-operating torque motor
- Irreversible single stage worm gear provides instant braking and slip free operation
- An ergonomic T-handle for rapid wire rope payout
- Heavy duty roller fairlead with grease zerk fittings
- EN 14492-1 supported: 10:1 D/d ratio, 2:1 wire rope strength and 1.5d freeboard for severe duty car and commercial recovery
- Standard Compliance: CE Machinery Directive 2006/42/EC, EN 14492-1:2006 Power Driven Winches and SAE J706
Leveranstid 5-7 arbetsdagar.
Övriga produkter i denna kategori
Teknisk info
LVYak 7 LONG DRUM
- 7,000 lb hydraulic worm gear winch
- Powered by an onboard hydraulic pump or PTO
- Fast and variable recovery speeds for high working rate
- High efficient and constant-operating torque motor
- Irreversible single stage worm gear provides instant braking and slip free operation
- An ergonomic T-handle for rapid wire rope payout
- Heavy duty roller fairlead with grease zerk fittings
- EN 14492-1 supported: 10:1 D/d ratio, 2:1 wire rope strength and 1.5d freeboard for severe duty car and commercial recovery
- Standard Compliance: CE Machinery Directive 2006/42/EC, EN 14492-1:2006 Power Driven Winches and SAE J706
Specification/Part Numbers
- Part number: PN 681260 (Std. drum) / PN 681266 (Long drum)
- Rated line pull: 3,175 kg / 7,000 lb (SAE J706 rating)
3,200 kg (EN 14492-1 rating) - Line speed (at 1st layer of rope) : 5.2 mpm at 40 l/min (17.1 fpm at 10.6 g/min)
- Operation pressure: 110 bar / 1,595 psi
- Max oil flow: 40 l/min (10.6 g/min)
- Hydraulic motor: 48.6 cm3/rev (3.0 in3/rev)
- Gear ratio: 1-stage planetary gear 50:1
- Winch construction: Aluminum die cast housings with steel drum
- Clutch (Freespooling): Worm gear disengaged
- Brake: Irreversible worm gear
- Rotation of winch: Wire rope shall be under-wound orientation only
- Drum barrel diameter: 90 mm (3.5″)
- Drum flange diameter: 168 mm (6.6”)
- Distance between flanges: 160 mm (6.3″) – Std. drum
240 mm (9.5″) – Long drum - Mounting bolts pattern: 130 x 211 mm (5.1″ x 8.3”) – Std. drum
130 x 291 mm (5.1” x 11.5”) – Long drum - Wire rope recommended:
*10 mm x 10.7 m for Std. drum and 16.2 m for Long drum, 1,960 N/mm2 grade with a minimum breaking strength of 69.8 kN required for EN 14492-1 rating.
